Please use this identifier to cite or link to this item:
http://studentrepo.iium.edu.my/handle/123456789/11902
Full metadata record
DC Field | Value | Language |
---|---|---|
dc.contributor.advisor | Fathilah Ali, Ph.D | en_US |
dc.contributor.advisor | Azlin Suhaida Azmi, Ph.D | en_US |
dc.contributor.advisor | Jamarosliza Jamaluddin, Ph.D | en_US |
dc.contributor.author | Maizatul Akmal Johari | en_US |
dc.date.accessioned | 2024-01-18T06:17:04Z | - |
dc.date.available | 2024-01-18T06:17:04Z | - |
dc.date.issued | 2023 | - |
dc.identifier.uri | http://studentrepo.iium.edu.my/handle/123456789/11902 | - |
dc.description.abstract | Polymer encapsulation is commonly adopted in drug delivery systems to form encapsulation that can assist in delivering active compound to the targeted area. Acalypha indica (AI) crude extract was obtained from AI plants through ultrasound assisted extraction, is naturally unstable in external environment, thus need to be encapsulated to protect against volatility. Chitosan has promising properties good for drug carriers. Herein, this study emphasized the development of the encapsulations of AI extracts using ratio of chitosan: PCL concentration, PVA concentration , and Concentration of chitosan-PCL blend) The percentage of encapsulation efficiency (EE%) was recorded as a response for each parameter. Fourier Transform Infrared Spectroscopy (FTIR), scanning electron microscopy (SEM), particle size analyzer, and zeta potential were used to analyze the properties of selected microencapsulated (-24.0 and -26 mV). 2.631 ± 0.14 and 3.568 ± 1.35 respectively. Overall, the encapsulation of (AI) extracts was successful and has the potential to be applied in drug delivery. | en_US |
dc.language.iso | en | en_US |
dc.publisher | Kuala Lumpur : Kulliyyah of Engineering, International Islamic University Malaysia, 2023 | en_US |
dc.title | Encapsulation of acalypha indica extract in chitosan-polycaprolactone blend | en_US |
dc.type | Master Thesis | en_US |
dc.description.identity | G1834100MaizatulAkmalBintiJohari | en_US |
dc.description.identifier | Thesis : Encapsulation of acalypha indica extract in chitosan-polycaprolactone blend / by Maizatul Akmal Binti Johari | en_US |
dc.description.kulliyah | Kulliyyah of Engineering | en_US |
dc.description.programme | Master of Science in Engineering | en_US |
dc.description.abstractarabic | يتم اعتماد التغليف البوليميري الحيوي بشكل شائع في أنظمة توصيل الأدوية لتشكيل تغليف يمنع انحلال المركبات النشطة قبل الوصول إلى موقع معين. على الرغم من وجود اهتمام بحثي كبير بالعقاقير الاصطناعية ، إلا أن تغليفها بمركبات نشطة طبيعية يبدو أقل دراسة بشكل ملحوظ. نظرًا لأن المركبات النشطة بيولوجيًا Acalypha indica غير مستقرة في البيئة الخارجية وأثناء النقل ، فإن التغليف ضروري كحامل لتقليل فقد الأدوية. Chitosan لها خصائص واعدة جيدة لشركات الأدوية.يمكن أن يفيد المزج الفيزيائي Chitosan مع PCL عبر عملية التغليف الفيزيائية في شل حركة مقتطفات AI ضد أي تفاعلات مع البيئة الخارجية من خلال التغليف. تركز هذه الدراسة على تطوير تغليفات مستخلص Acalypha indica لتوصيل الدواء. في هذا البحث ، تم مزج Chitosan مع polycaprolactone (PCL) بطريقة تبخير المستحلب والمذيب والتجفيف بالتجميد كأسلوب تجفيف لتقوية تشكيل كبسولات دقيقة. في البداية ، تمت دراسة وقت الصوتنة للعثور على أفضل وقت. اولا اجريت التجربة لايجاد افضل زمن صوتنة والذي تراوح من 3، 5، 7 الى 10 دقائق. تمت دراسة ثلاثة (3) معلمات (نسبة Chitosan: تركيز PCL ، تركيز PVA ، وتركيز مزيج Chitosan- PCL) لتغليف Al عن طريق تثبيت معامل في وقت واحد (OFAT). تم تسجيل النسبة المئوية لكفاءة التغليف (EE٪) كاستجابة لكل متغير. شرعت الدراسة في التصميم المركب المركزي (CCD) كأداة لتحسين منهجية سطح الاستجابة (RSM) ، باستخدام البيانات الأولية التي تم الحصول عليها من OFAT كنقاط مركزية. تم إجراء المصادقة وتم اختيار معطيات من أعلى نسبة (98.70٪) وأدنى (87.80٪) من كفاءة الطاقة (EE٪) مقترحة من قبل وزارة الطاقة. تم استخدام مطيافية فورييه لتحويل الأشعة تحت الحمراء (FTIR) وحجم الجسيمات وإمكانات زيتا لتحليل عينات الكبسلة الدقيقة المختارة. أظهرت النتائج اختلاف القيم المتوقعة والتجريبية بنسبة أقل من 7.5٪. كشفت صور SEM عن تشكيل أشكال كروية ناعمة. لم تكن إمكانات زيتا لأعلى وأدنى نسبة EE% مسجلة فرقًا كبيرًا )24.0- و -26 mV). بينما كان حجم الحبيبات التي تم الحصول عليها 2.631 ± 0.14 و 3.568 ± 1.35 على التوالي. بشكل عام ، كان تغليف مستخلصات (AI) ناجحًا ولديه إمكانية تطبيقه في توصيل الدواء. | en_US |
dc.description.nationality | Malaysian | en_US |
dc.description.notes | Thesis (MSCE)--International Islamic University Malaysia, 2023. | en_US |
dc.description.physicaldescription | 1 online resource (xiii, 83 leaves) ; color illustrations. | en_US |
item.openairetype | Master Thesis | - |
item.grantfulltext | open | - |
item.fulltext | With Fulltext | - |
item.languageiso639-1 | en | - |
item.openairecristype | http://purl.org/coar/resource_type/c_18cf | - |
item.cerifentitytype | Publications | - |
Appears in Collections: | KOE Thesis |
Files in This Item:
File | Description | Size | Format | |
---|---|---|---|---|
G1834100MaizatulAkmalBintiJohari_24.pdf | 24 pages file | 3.09 MB | Adobe PDF | View/Open |
G1834100MaizatulAkmalBintiJohari_SEC.pdf | Full text secured file | 12.86 MB | Adobe PDF | View/Open |
G1834100MaizatulAkmalBintiJohari_SEC_COPYRIGHT_DECLARATION.pdf Restricted Access | Copyright Declaration | 87.42 kB | Adobe PDF | View/Open Request a copy |
Google ScholarTM
Check
Items in this repository are protected by copyright, with all rights reserved, unless otherwise indicated. Please give due acknowledgement and credits to the original authors and IIUM where applicable. No items shall be used for commercialization purposes except with written consent from the author.